The following modifications shall apply to the original DCR attachment (C&K mark-up of ESCC3401/072 issue 6).
Note - The other changes indicated in the original DCR attachment still apply.
- Pages 10 to 23, Figures 2 b c d e f i j k: delete proposed new Note 3 from all figures as it is not relevant to the physical dimensions.
- Page 25, Para 4.4.2. Amended Para should be as follows:
4.4.2 Lightweight Backshell
4.4.2.1 Shell and Clamps (if applicable)
Material shall be aluminium alloy with:
(a) Standard finish, for all lightweight backshell Type Variants: gold (0.7μm minimum) over nickel (20μm minimum)
or
(b) Alternate finish, for Type Variants 05 to 39, 46 to 65, 72 to 80 (characteristic code 'A174'; see Para. 4.5.3.3): nickel (25.4μm minimum)
4.4.2.2 Screws
Material shall be brass plated with gold (0.7μm minimum) over copper (1μm minimum).
- Page 26, New Para 4.5.3.3 should be as follows:
4.5.3.3 Alternate Finish
Type Variants 05 to 39, 46 to 65, 72 to 80 are available with 'Standard' and 'Alternate' finishes. If the 'Alternate' finish is required, the code "A174" must be included in the characteristics marking. If the "A174" is omitted, it shall be assumed that the 'Standard' finish is required.
|
