The following amendments and additions apply to the original DCR contents:
1) Ref Change 5:
In addition to the changes proposed to Table 1(a), add new column 5 to Table 1(a) in order to clarify the difference between new Variant 13 & existing Variant 08 as follows:
New column heading: "(5) Lead Material"
New column to contain: "Note 3" applicable to Variants 08 09 10 11 12 and "Note 4" applicable to new Variant 13.
Add new notes under Table 1(a):
"Note 3. The lead material shall 26 AWG fluoropolymer insulated wire with ESCC Component Number 390101203B in accordance with ESCC Detail Specification No. 3901/012."
"Note 4. The lead material shall 26 AWG polyimide insulated wire with ESCC Component Number 390100124B in accordance with ESCC Detail Specification No. 3901/001."
2) Ref Change 7:
As Table 1(a) now specifies the lead material details, delete Change 7 and replace with the following amendment to Para 4.4.2:
Para 4.4.2 shall read as follows:
"4.4.2 Lead Material
The lead material shall be as specified in Table 1(a). One lead shall carry an identification sleeve which shall carry all part marking specified in para. 4.5."
3) Add the following new Changes 10, 11 & 12 to this DCR:
Change 10
Para 2: Add missing applicable documents:
"(b) ESCC Detail Specification No. 3901/001, Polyimide Insulated Wires and Cables, Low Frequency, 600V, -100 to +200 degree C"
"(c) ESCC Detail Specification No. 3901/012, Extruded, Crosslinked Fluoropolymer Insulated Wires and Cables on Silver Plated Copper Conductor, Low Frequency, 600V, -100 to +200 degree C"
Change 11
Table 1(b): Add reference to Variant 13 in Note 3 as follows:
"3. -40C for Variants 10, 11, 12; and -60C for Variants 08, 09, 13 to the Maximum Operating
Temperature specified in Column 4 of Table 1(a)."
Change 12
Para 4.3.2: Add reference to Variant 13 as follows:
"4.3.2 Weight
The maximum weight of the thermistors specified herein shall be 4 grammes, with the exception of
Variants 08 and 13 whose maximum weight shall be 2.3 grammes."
|
