| Document Properties | |
|---|---|
| Feedback to: | Fernando Martinez |
| Published: | 31-03-2016 |
| Public Document | |
|
|
Tuesday 1-March-2016 – morning session - Component Technologies I:
"ST65nm hardened ASIC technology for space applications"
P. Roche, Y. Gillot (STM, France), F. Malou (CNES, France), L. Hili (ESA ESTEC, NL)
"First Telecom Application of Digital Components Developments: 65nm ASICs and Data converters"
C. Amiot-Bazile and F. Malou (CNES, France), P. Voisin (TAS, France)
"Enabling SPACE applications in advanced CMOS nodes: Challenges and Opportunities"
E. Vincent and V. Huard, Device-to-Product Reliability Manager (STM, France)
"The insertion of flip-chip technology in space systems"
J-P. Peltier, e2v (France)
"Qualification of a 150nm SOI ASIC technology for space applications"
B. Bancelin (Atmel, France)
"Developing parts using third party libraries and manufacturing services"
S.A. Habinc, Managing Director (Cobham Gaisler, Sweden)
"Active EEE Components for Space: trends, standards, roadmap"
L. Marchand, Head of the Components Technology Section (ESA ESTEC, NL)
"Lifetime predictions of Deep Sub-Micron commercial EEE parts for space applications"
F. Molière (Airbus Group Innovations, France)
Tuesday 1-March-2016 – afternoon session - Quality Assurance and legal regulations for Space EEE parts:
"The evolution of the ESA alerts system"
R. Campagnuolo, ESA Alert Focal Point and R. de Marino (ESA ESTEC, the Netherlands)
"The Airbus Defence & Space EEE alerts system (CTC)"
A. Mouton (Head of EEE Parts Project Engineering, Airbus Defence and Space, France)
S. Agarwal (NASA/JPL-Caltech, USA)
"Eurospace’s experience and results in DPA on space qualified parts 2008-2015"
A. Mouton (Airbus Defence and Space, France), E. Caramagno (Thales Alenia Space, Italy), G. Fernandez (Alter Tecnology, Spain), for ASD Eurospace
T. Becker, Chief EU Compliance Officer (REACHLaw, Finland)
"Evolution of Export Control rules and consequences for EEE components"
T. Torloting (CNES, France)
"Experience with cumulative He leak detection (CHLD) and adoption of MIL-STD-883/J"
V. Bergaplass, Production Manager (Kongsberg Norspace, Norway)
Wednesday 2-March-2016 – morning session - EEE Component policy and experiences in space systems:
"EEE Parts in the New Space Paradigm: When better is the enemy of good enough?"
K.A. LaBel, co-manager NEPP Program (NASA/GSFC, USA)
"US Air Force Space Requirements for Launch Vehicles"
L. Harzstark, Distinguished Engineer (The Aerospace Corporation, USA)
"New EEE components R&D activity in JAXA for realization of novel space missions"
N. Ikeda and H. Shindou, Senior Researcher R& D Directorate (JAXA, Japan)
"Research activities in EEE Space components within FP7 and Horizon 2020"
H. Guerrero, Policy Officer at the Space Policy and Research Unit (European Commission, DG GROW, Directorate General for Internal Market, Industry, Entrepreneurship and SMEs)
"Application Validation Technologies of Aerospace EEE Components"
W. Wang, Head of Components Application Validation (China Aerospace Components Engineering Center –CACEC, China Academy of Space Technology –CAST, PRC)
"European Component Initiative (ECI) status and way forward"
M. Nikulainen, Head of Components Technology and Space Materials Division (ESA/ESTEC, the Netherlands)
"Commercial Satellite Perspective on EEE Parts"
J. Loman, Executive Director, Engineering Technologies, and A. Hendrix (SSL, USA)
"EEE non dependence"
S. Moranta, Senior Consultant-Space (Pricewaterhouse Coopers, France)
"Parts policy and experience with the ATV, parts approach for MPCV"
F. Kuechen, Head of Parts Agency (Tesat-Spacecom, Germany)
"Parts policy and experience for launchers (lessons learnt from Ariane 5, EEE parts approach for Ariane 6)"
E. Zakka-Bajjani and G. Lemarchand (Airbus Safran Launchers, France)
Wednesday 2-March-2016 – afternoon session - COTS experiences in space systems and terrestrial HiRel systems:
"An overview of automotive component reliability studies by NASA"
M. Sampson, co-Manager NEPP Program (NASA GSFC/ USA)
"Space components vs parts for automotive and medical applications"
J. Vernet, V. Lepaludier, J. Seiler (Atmel, France)
"A comparison of requirements for stacked components for medical and space applications"
P. Couderc, R+D Manager ( 3D Plus, France)
"Cu wire in Automotive: Key challenges and robustness validation"
A. Mancaleoni, Automotive Product Group Assembly Reliability Principal Engineer, and F. Quercia, Wire bonding process development (STMicroelectronics, Italy)
"Evolution of a space hand"
H.J. Sedlmayr, Robotics and Mechatronics Centre (DLR, Germany)
"COTS validation for the Solar Orbiter project"
S. Massetti (ESA ESTEC, the Netherlands) and O. Ramos (Alter Technology, Spain"
"The ECSS -Q-ST-60-13C approach to Commercial EEE Components - the concept and key requirements"
P. Lay, Head of Components Policy and Qualification Section (CNES, France)
"First experiences with ECSS-Q-ST-60-13C use in CNES projects"
C. Aicardi and P. Lay, (CNES, France)
"Technical Risk Analysis on IC in Schneider Electric"
C. Garden (Schneider Electric, France)
Thursday 3-March-2016 – morning session- Component Technologies II:
"NASA NEPP Program Memory Technology – Testing, Analysis and Roadmap"
D.J. Sheldon, Assurance Technology Program Office Manager (NASA/JPL-Caltech, USA)
"Advanced Concepts and Components for adaptive Avionics"
P. Armbruster, Head of Data Systems Division (ESA ESTEC, the Netherlands)
(*) D. Lacombe, Passive Components Specialist and ESCC CTB Passive components WG Chair (ESA ESTEC, NL), (**) T. Zedníček, President of EPCI
"Reliability and Qualification of Fiber Optic Components for Space Applications"
C. Tabbert, VP Sales and Marketing (Ultra Communications Inc, USA)
"Non-standard Test Setups for Optoelectronic COTS"
J. Barbero, E. Cordero, L. Peñate, P. Adamiec and D. Lopez (Alter Technology, Spain)
"Laser Communication Terminals at 1064nm. In orbit status and future needs"
H. Zech (Tesat Spacecom, Germany) and D. Staerk (Airbus DS, incl. Tesat)
Thursday 3-March-2016 – morning and afternoon sessions- Reliability and Radiation Hardness Assurance:
"Reliability Physics of Electronic Devices. Trends & recent relevant results for space systems"
M. Bafleur(LAAS-CNRS, France) and P. Perdu (CNES, France)
"Reliability vs on/off cycles (methodology and implementation)"
A. Dufour (CNES, France)
"Cu wire reliability evaluation, implications for space components"
D. Samson (Atmel, France)
"FIDES Reliability Predictions"
F. Davenel (DGA, France)
"FIDES Reliability Predictions, a user’s perspective"
S. Bourbouse (Airbus DS, France)
"Radiation Hardness Assurance update"
C. Poivey, Senior Radiation Specialist (ESA ESTEC, the Netherlands)
"SEE testing on GaAs test vehicles. Methodology, Results and Derating. Lessons Learned"
L. de Pablo and J. Cueto (Thales Alenia Space, Spain)
Thursday 3-March-2016 – afternoon session - Update on EEE Component Standardisation Activities
P. Majewicz (NASA LRC/ USA)
"The ESCC Policy and Standards Working Group (PSWG)"
P. Lay, ESCC PSWG Chairman
"The ESCC Components Technology Board (CTB)"
J-L. Cazaux, ESCC CTB Chairman
"ESCC Executive Reports and News (DLR*) (ESA)"
*G. Joormann, Head of EEE Parts Section (DLR, Germany) and **A. Pesce, ESCC Executive Deputy manager and Head of ESCC Components Standardisation Section (ESA ESTEC, NL)
